PV29-2R1D-J02 DENISON PV29 series Piston Pump

Product Description

DENISON PV series open circuit axial piston pump PV29-2R1D-J02

This series of pumps are widely used in power plants and industrial equipment, with excellent quality and reliable performance. There are five types of PV6, PV10, PV15, PV20 and PV29, with displacements of 14.4ml/rev, 20.6ml/rev, 34.2ml/rev, 42.9ml/rev and 61.9ml/rev, respectively. In addition to PV29 high working pressure of 275bar, the other types of high working pressure are 310bar.

T6 series vane pump has three specifications (C, D and E) of the shell, each of which can be equipped with corresponding series of pump core components with different displacement, forming a series of specifications of the pump. When the suction is atmospheric pressure and at high speed, the flow rate and displacement range of each specifications series are as follows:

C series: 10 to 100 ml/rev (1200 rpm, 3 to 31 GPM);

D series: 48 to 158 ml/rev (1200 rpm, 14 to 50 GPM);

E series: 132 to 227 ml/rev (1200 rpm, 42 to 72 GPM).

(T6 series vane pump)

High working pressure - rated working pressure up to 275 bar, which can reduce the size of hydraulic actuators, hydraulic control valves and piping, so as to reduce installation costs. If the work pressure is reduced, the working life can be prolonged.

Volumetric efficiency-Typical volumetric efficiency is 0.94. Even under loading, it has a high volumetric efficiency, which can improve productivity, reduce heating and reduce the operating cost of hydraulic equipment, and allow the speed to be as low as 600 rpm at full pressure (vehicle type pump can be as low as 400 rpm).

The mechanical efficiency is high - the typical value is 0.94, and the energy loss is reduced.

The speed range is wide - the speed range is 600-2800 rpm (400-2800 rpm for vehicle type pump). Combining with the way of installing large displacement pump core assembly in small size shell, the working state can be optimized and the noise can be reduced.

Low speed (600 rpm, 400 rpm), low pressure and high viscosity (860 cSt, 2000 cSt) - make T6 series vane pumps adapt to low temperature conditions, low power consumption and no risk of sticking;

The pressure fluctuation is small - about (+2 bar), which can reduce the noise of hydraulic pipeline and prolong the service life of other components in hydraulic circuit.

Low noise improves work safety and increases acceptance.

Strong anti-pollution ability - This series of pumps adopt double lip blades, which have strong anti-pollution ability and long service life.

Optional structural parameters and forms are abundant, such as pump core displacement, transmission shaft form, oil port configuration form, etc. It is convenient for users to choose according to installation needs.

Diversity of Installation Forms - 32 combinations can be installed for dual pumps and 128 combinations for triple pumps, which can reduce costs and improve performance.

Extensive applicability - Installation method conforms to SAE J744a and ISO 3019-1 2-hole flange form, and is equipped with a variety of flat keys and spline drive shafts for selection. For automotive pumps, there is also a T-type transmission shaft (in line with SAEJ718c) option, allowing direct assembly with tractors (speed 540-1000rpm);

Double Seal Options - Vehicle type pump with double seals (T6*P type), with oil drain interface, can be installed directly on the gearbox.

Leader Industrial Manufacture Co.,Limited. is a professional agent of foreign brand plunger pumps and hydraulic pumps. It mainly deals in Resroth,Yuken,Daikin,Nachi,Vickers,Sumitomo,Tokimec,Uhida,Yeoshe,Dension, and other European and American brands of original oil pumps, pump cores and accessories. Leader Industrial is committed to providing professional suppliers of hydraulic machinery equipment and accessories.It is widely used in injection moulding machine, die-casting machine, oil press, ship machinery, construction machinery, concrete pump truck, mixing truck, construction machinery, rotary drilling machine, bulldozer, loader, roller, paver, crane machinery, forklift, coal mine machinery, port machinery, oil field machinery and other heavy engineering machinery series.

If you are interested in our products, please feel free to contact us：info@ldhydraulic.com

Related News

Modification of vane pump in hydraulic system

In July 1992, Qingdao Petrochemical Plant used 7 electro-hydraulic controlled cold-wall slide valves (referred to as electro-hydraulics) jointly developed by Lanlian Machinery Plant and Beijing Liusan 4 in the technical transformation project of 3.5M t/...

Improvement of seal structure design of hydraulic valve

Hydraulic control valves, hydraulic control check valves, etc. are control valve types of modern mechanized coal mining fully mechanized hydraulic support, mainly used to control the lifting, support and movement of hydraulic supports. In order...

Technical measures to improve the pump efficiency of the pump（2）

Rational use of gas energy and reduced gas impact The influence of gas on oil well production varies with the oil well's own conditions. For some oil wells that have been converted from self-spraying to oil extraction, the initial oil well still has...

Our focus is to provide our customers with the reliable products and integrity service – to support their business to be more successful.which was designated as professional manufacturer of variable displacement pump by previous Ministry of Machine-Building Industry of China.We has been involved with the design, development and manufacture of variable displacement pump for many decades. Well-proven designs, the use of specially developed materials, constant testing and sophisticated mass production techniques ensure products of the very highest quality.