Home>Products>Hydraulic Valve>R900503335 DA20-1-5X/200-17 Rexroth Pressure cut-off valve, pilot-operated
R900503335 DA20-1-5X/200-17 Rexroth Pressure cut-off valve, pilot-operated
- Rexroth
R900503335 DA20-1-5X/200-17
- Germany
- CE ISO
- Negotiation
- contact us
- standrd package
- 5-7 workdays
- T/T,Western Union
- 60 pcs
- L&X Hydraulic Co., LTD2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Product Description
Product Description
Technical data
Size | 10 | 25 | 32 | ||
Weight | Type DA | kg | 3.8 | 7.7 | 13.5 |
Type DA …FS | kg | 4.4 | 8.3 | 14.1 | |
Type DAC … | kg | 1.2 | |||
Type DAC 30… | kg | 1.4 | |||
Type DAC 30…FS | kg | 1.9 | |||
Installation position | any | ||||
Ambient temperature range | NBR seals | °C | -30 … +80 | ||
FKM seals | °C | -20 … +80 |
hydraulic
Size | 10 | 25 | 32 | ||
Maximum operating pressure | Port P | bar | 315 | ||
Port A 1) | bar | 315 | |||
Port T 2) 3) | bar | 100 | |||
Port Y 2) 3) | bar | 100 | |||
Set pressure range | Pressure rating 50 | bar | 25 … 50 | ||
Pressure rating 100 4) | bar | 50 … 100 | |||
Pressure rating 200 4) | bar | 100 … 200 | |||
Pressure rating 315 4) 5) | bar | 200 … 315 | |||
Switching pressure differential | Version "FS" | freely adjustable (10 % to 50 % of nominal set pressure) | |||
Version "10" 4) | % | 10 | |||
Version "17" 4) | % | 17 | |||
Maximum flow | Version "FS" | l/min | 120 | 250 | 400 |
Version "10" | l/min | 40 | 80 | 120 | |
Version "17" | l/min | 60 | 120 | 240 | |
Hydraulic fluid | Mineral oil (HL, HLP) according to DIN 51524, other hydraulic fluids on request | ||||
Hydraulic fluid temperature range | NBR seals | °C | -30 … +80 | ||
FKM seals | °C | -20 … +80 | |||
Viscosity range | maximum | mm²/s | 10 … 800 | ||
Recommended | mm²/s | 20 … 60 | |||
Maximum admissible degree of contamination of the hydraulic fluid 6) | Class 20/18/15 according to ISO 4406 (c) |
1) | (after switching P to T) |
2) | Attention! The applied pressure adds to the set pressure! The switching pressure differential remains unchanged within the setting range! |
3) | The tank pressure must not exceed the pump pressure. |
4) | For switching pressure differential adjustment, the following points must be observed:The top and bottom switching points must be within the setting range of the pressure rating (e.g. for a pressure rating of 100 bar: top switching point 100 bar, bottom switching point 50 bar ≙ 50 % switching pressure differential)– The minimum switching pressure differential mainly depends on the system (set pressure, pump and actuator flow, accumulator size and preload, line length and resistance, etc.) Here, the valve offers the possibility of optional adjustment of the switching pressure differential to the system. For these reasons, however, the minimum adjustable switching pressure differential of the valve cannot always be realized at the system. – Generally: Reduce the tubing between pressure cut-off valve and hydraulic accumulator to a minimum and ensure depressurized pilot oil (Y) discharge as possible. – For the switching pressure differential factory setting, refer to the respective information sheet. |
5) | Type DA …FS... 150 to 315 bar |
6) | The cleanliness classes specified for the components must be adhered to in hydraulic systems. Effective filtration prevents faults and simultaneously increases the life cycle of the components. For the selection of the filters, see www.boschrexroth.com/filter. |
For applications outside these parameters, please consult us!
Related News
Modification of vane pump in hydraulic system
In July 1992, Qingdao Petrochemical Plant used 7 electro-hydraulic controlled cold-wall slide valves (referred to as electro-hydraulics) jointly developed by Lanlian Machinery Plant and Beijing Liusan 4 in the technical transformation project of 3.5M t/...
Improvement of seal structure design of hydraulic valve
Hydraulic control valves, hydraulic control check valves, etc. are control valve types of modern mechanized coal mining fully mechanized hydraulic support, mainly used to control the lifting, support and movement of hydraulic supports. In order...
Technical measures to improve the pump efficiency of the pump(2)
Rational use of gas energy and reduced gas impact The influence of gas on oil well production varies with the oil well's own conditions. For some oil wells that have been converted from self-spraying to oil extraction, the initial oil well still has...
Our focus is to provide our customers with the reliable products and integrity service – to support their business to be more successful.which was designated as professional manufacturer of variable displacement pump by previous Ministry of Machine-Building Industry of China.We has been involved with the design, development and manufacture of variable displacement pump for many decades. Well-proven designs, the use of specially developed materials, constant testing and sophisticated mass production techniques ensure products of the very highest quality.
Contact Us
- L&X Hydraulic Co., LTD
- AddressNO.120 beijing Road,Jinan,Shandong,China
- Phone(Working Time)+86-15226261101
Product Categories
New Products
- R900500256 DR 10 DP1-4X/150YM Rexroth Pressure reducing valve, direct operated DR 10 DP
- R900517812 Z2FS 10-5-3X/V Germany Rexroth Throttle check valve
- R900442260 SL10 PA2-4X Bosch Rexroth Check valve hydraulically pilot operated
- LS-G02-2CA-25-EN-645 Daikin LS Series Low Watt Type Solenoid Operated Valve
- R900560047 Z2S 22 B1-5X/SO60 Rexroth Check valves, pilot operated